Installation Instructions

ManualsBrandsToro ManualsAttachmentsRelay Assembly for Deluxe PVC Seat, LT3240, T4240 and R3240T Mowers

Issued: 19.04.11 Approved: Mod. No. 5059845.B Sheet 1 of 6 Part No. 111-4673 (A)

Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England.

Telephone: 01279 723444 Fax: 01279 723821

E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.uk

These kits enables the deluxe seat to be tted to the LT3240, T4240 and R3240T only.

The kit consists of the following:

Relay assembly

These instructions include safety and tting of the assembly. These instructions should be considered as part of the

machine.

For all other information refer to your Operator’s Manual and Parts List.

In pursuit of continuous product development, TORO reserve the right to alter specications without notice.

Left and Right: Throughout this manual refers to the mower when looking in the direction of forward travel.

INTRODUCTION

FITTING INSTRUCTION SHEET

RELAY ASSEMBLY FOR THE DELUXE SEAT (MODELS 02865/02866 Only)

RELAY ASSEMBLY PART NUMBER 111-0916

For LT3240, T4240 and R3240T

Models 02740, 02750 and 02770

ORIGINAL VERSION (EN)

Serial No. From 311000001

CONTENTS

Page No.

Introduction 1

Safety Precautions 2

Fitting Instructions 2

Wiring Harness 3

Wiring Diagram 3

Notes 4 - 5

Warranty 6

Summary of content (6 pages)

PAGE 1
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England. Telephone: 01279 723444 Fax: 01279 723821 E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.uk FITTING INSTRUCTION SHEET RELAY ASSEMBLY FOR THE DELUXE SEAT (MODELS 02865/02866 Only) RELAY ASSEMBLY PART NUMBER 111-0916 For LT3240, T4240 and R3240T Models 02740, 02750 and 02770 ORIGINAL VERSION (EN) Serial No. From 311000001 CONTENTS Page No.
PAGE 2
SAFETY PRECAUTIONS THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED. EXERCISE GREAT CARE AND FOLLOW THE ADVICE GIVEN TO AVOID POTENTIAL HAZARDOUS SITUATIONS Before working on the machine it is essential that you read and understand the Safety Precautions as shown in the Operator’s Manual. Before working on the machine it is essential that : - The engine is switched off and the battery terminals are disconnected. - The parking brake is applied. - There is no pressure in the hydraulic system.
PAGE 3
FITTING INSTRUCTIONS Continued Fig 2 Fig 3 Issued: 19.04.11 Approved: Mod. No. 5059845.B Sheet 3 of 6 Part No.
PAGE 4
NOTES Issued: 19.04.11 Approved: Mod. No. 5059845.B Sheet 4 of 6 Part No.
PAGE 5
NOTES Issued: 19.04.11 Approved: Mod. No. 5059845.B Sheet 5 of 6 Part No.
PAGE 6
WARRANTY The Toro Total Coverage Guarantee A Limited Warranty • Conditions and Products Covered Toro® The Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant your Toro Commercial product (“Product”) to be free from defects in materials or workmanship for two years or 1500 operational hours*, whichever occurs first. This warranty is applicable to all products with the exception of Aerators (refer to separate warranty statements for these products).