Installation Instructions

Table Of Contents

FormNo.3406-902RevB

TUVIn-LineFuseKit

ModelNo.111-5101

ModelNo.111-6190

InstallationInstructions

InstallingtheKit

1.Parkthemachineonalevelsurfaceandengage

theparkingbrake.

g037865

Figure1

2.Raisethecuttingunits.

3.Shutofftheengineandremovethekey.

WARNING

Ifyouleavethekeyintheignitionswitch,

someonecouldaccidentlystartthe

machineandseriouslyinjureyouor

otherbystanders.

Removethekeyfromtheignitionswitch

beforeyoudoanymaintenance.

4.Lockthecuttingunitsintheraisedpositionusing

thetransportlatches.

5.Locatetheconnectorfor1oftherearposition

lamps.

6.Disconnectthelamp.

7.Installthein-linefusebetweentheconnectors

(Figure2).

g037913

Figure2

Typicalinstallation

1.Fusehousing2.Lampconnectors

8.Repeattheprocedureforthelampontheother

sideofthemachine.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3406-902*B

PAGE 1
Form No. 3406-902 Rev B TUV In-Line Fuse Kit Model No. 111-5101 Model No. 111-6190 Installation Instructions Installing the Kit 1. Park the machine on a level surface and engage the parking brake. g037865 Figure 1 2. Raise the cutting units. 3. Shut off the engine and remove the key. WARNING If you leave the key in the ignition switch, someone could accidently start the machine and seriously injure you or other bystanders. Remove the key from the ignition switch before you do any maintenance. 4.