Installation Instructions

Figure 4

1. Bolt (3/8 x 1-1/4 inches)

4. Curved washer

2. Bolt (3/8 x 1 inch) 5. Locknuts (3/8 inch)

3. Top bracket (round hole on

top)

3. Install the three stac k ed pulleys to the brac k ets

using a car riag e bolt (5/8 x 4 inc hes) from the

bottom, ﬂang ed spacer , spacer and a loc kn ut

(5/8 inc h) ( Figure 5 ).

Figure 5

1. Plastic cap 4. Three stacked pulleys

2. Nut, (5/8 inch)

5. Spacer with ange

3. Spacer

6. Carriage bolt, (5/8 x 4

inches)

4. T or que the loc kn ut (5/8 inc h) to 100-150 ft-lb

(136-203 N ⋅ m).

5. Install the plastic cap onto the pulleys ( Figure

5 ).

6. Install the belts for the mo w er onto the 3

stac k ed pulleys . R efer to the Operator’ s Manual

for the cor rect procedure .