Installation Instructions

FormNo.3358-855RevA

BasketTransportKit

Reelmaster6700-DTractionUnit

ModelNo.114–3971

InstallationInstructions

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

InstallingtheBasketGuides

andBrackets

1.UseFigure1todeterminethelocationsatwhich

thenewbasketguidesandbasketbracketsmust

bemountedtothe#6and#7cuttingunitcarrier

frames.

Figure1

*Thenewpartsarerequiredattheselocationswhenusing

thebasketkitonReelmaster6700TractionUnits.

2.Removethebasketsfromthe#6and#7cuttingunit

carrierframes.

3.Removetheboltsandatwasherssecuringthe

basketguidestotheouterendsofthe#6and#7

cuttingunitcarrierframes(Figure1).

Figure2

1.Bolt3.Basketguide

2.Flatwasher

4.Carrierframe

4.Usingtheboltsandwashersremoved,mountthe

newbasketguidestotheouterendsofthe#6and

#7cuttingunitcarrierframes(Figure3).Theexible

latchesaretobepositionedforward.

Figure3

1.Basketguide3.Washer

2.Bolt

5.Removethecarriageboltsandnutssecuringthe

basketbracketstotheoutersidesofthe#6and#7

cuttingunitbaskets(Figure4).

Figure4

1.Basketbracket

2.Carriagebolts

6.Usingthecarriageboltsandnutsremoved,loosely

mountthenewbasketbracketstotheoutersidesof

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

PAGE 1
Form No. 3358-855 Rev A Basket Transport Kit Reelmaster 6700-D Traction Unit Model No. 114–3971 Installation Instructions Note: Determine the left and right sides of the machine from the normal operating position. Installing the Basket Guides and Brackets #7 cutting unit carrier frames (Figure 3). The flexible latches are to be positioned forward. 1. Use Figure 1 to determine the locations at which the new basket guides and basket brackets must be mounted to the #6 and #7 cutting unit carrier frames.
PAGE 2
the #6 and #7 cutting units, positioning as shown in Figure 5. Figure 6 Note: When the #6 and #7 cutting units are raised to the transport position, secure the basket latches to the basket brackets. Figure 5 1. Basket bracket 2. Carriage bolts 7. Reinstall the baskets to the #6 and #7 cutting unit carrier frames by inserting the basket mounting pin into the basket guide bracket and depressing the opposite mounting pin into the pivoting basket bracket 8.