Installation Instructions

6.Installtheengineguardstraptothebackofthe
machine.
7.Installthehoodsupportbracketwiththepreviously
removednutsandbolts.
3
InstallingtheWaterSeparator
andFuelPump
Partsneededforthisprocedure:
1
SmallR-clamp
1
Bolt(1/4x1–1/4inches)
1
Locknut(1/4inch)
1LargeR-clamp
1
Bolt(5/16x1-3/4inches)
1
Bolt(5/16x3/4inch)
2
Locknut(5/16inch)
1Waterseparator
Procedure
1.InstallthesmallR-clamparoundthefuelpumpand
installittotheenginestrapwithabolt(1/4x1–1/4
inches)andnut(1/4inch)(Figure7).
Figure7
1.SmallR-clampwithfuel
pumpinstalled
3.Locknut(1/4inch)
2.Bolt(1/4x1–1/4inches)
2.InstallthewaterseparatorintothelargeR-clamp
andinstallittothehoodsupportbracketwithabolt
(5/16x1-3/4inches),abolt(5/16x3/4inch),and
2locknuts(5/16inch)(Figure8).
Figure8
1.LargeR-clampwithwater
separator
3.Bolt(5/16x1-3/4inches)
2.Locknut(1/4inch)4.Bolt(5/16x3/4inch)
4
ConnectingtheFuelHoses
andtheFuelPumpHarness
Partsneededforthisprocedure:
1Hose
3Hoseclamp
1Fuelpumpharness
Procedure
1.Installthehoseinstalledonthefuelpumptothe
waterseparatorwithahoseclamp.SeeFigure9
forthecorrectconnectiontouseonthetopofthe
waterseparator.
2.Installthehosetothewaterseparatorandtothe
enginefuelintakewith2hoseclamps(Figure9).
3.Installtheelectricalfuelpumpwiretothefuelpump
harness.
4.Installthefuelpumpharnesstothemainwire
harness(Figure9).
4