Installation Instructions

FormNo.3364-461RevA
CombandScraperKit
ForReelmaster
®
3100-DSeriesDPACuttingUnits
ModelNo.114–9376
ModelNo.114–9377
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Combbracket
1
Combscraper
1
Combplate
1
Comb
1
Carriagebolt(1/4x1inch)
4
Locknut(1/4inch)
4
Flatwashers(ifrequired)
8
Installthecombandscraperkit.
InstallingtheComband
ScraperKit
1.Placethemoweronalevelsurface.
2.Removetheboltandangenutsecuringeachendof
frontrollertorollerbrackets.Discardtheboltsand
angenuts.
3.Threadaangenutontoeachboltasshownin
Figure1.
Note:Thecomb/scraperassemblyisloosely
assembledatthefactory.Donottightenthelocknuts
atthistime.
4.Mounteachendofthecombbrackettothetop
ofeachrollerbracketwithaangenutandboltas
shownin
Figure1.
Note:Ifthescraperisnotrequired,removeitfrom
theassembly.Whenreassemblingthecomponents,
insert2washersontoeachboltsotheyactasspacers
betweenthecombbracketandcombplate(
Figure1).
Thewashersareshippedloose.
5.Makesuretherollerandcombassemblyaresecure
andcenteredintherollerbrackets,thentightenthe
angenutsonthebolts.
6.Usingagaugebarandruler,setthecomb
aggressivenesstomeetyourturfconditions.Secure
thelocknuts.
•Recommendedheightofcutrangeis0.375inch
to0.75inch(9to19mm).
•Lessaggressivesetting=HeightofCutSetting
•Moreaggressivesetting=1/8inch(3mm)
BelowHeightofCutSetting
Note:Itmayrequireafewweeksofoperationto
removeexcessgraininturf.
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved