Installation Instructions

FormNo.3367-735RevA

Slow-MovingVehicleSignKit

Groundsmaster360Multi-PurposeMachine

ModelNo.115–0014

InstallationInstructions

Installation

Description

Quantity

SMVEmblem

Emblembracket1

Bracketstrap1

Machinescrew,1/4x3/4inch

Flangenut,1/4inch

Installationinstructions1

Partscatalog1

1.Parkthemachineonalevelsurface,stoptheengine,

engagetheparkingbrakeandremovethekeyfrom

theignitionswitch.

2.Removethe(2)screwssecuringthestoragehousing

mountingbrackettothemachine’sframe(

Figure1).

Figure1

1.Storagehousingmounting

bracket

2.Mountingscrews

3.Removethestoragehousingfromthemachine.

4.Usingtheemblembracketasatemplate,locate,mark

anddrill(3)5/16inchdiameterholesinthefrontof

thestoragehousingasshowninFigure2.

Figure2

1.Emblembracket

5.Mounttheemblembrackettothestoragehousing

withthebracketstrap,(3)1/4x3/4inchmachine

screwsand(3)1/4inchangenuts(Figure3).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

PAGE 1
Form No. 3367-735 Rev A Slow-Moving Vehicle Sign Kit Groundsmaster 360 Multi-Purpose Machine Model No. 115–0014 Installation Instructions Installation Description Quantity SMV Emblem 1 Emblem bracket 1 Bracket strap 1 Machine screw, 1/4 x 3/4 inch 5 Flange nut, 1/4 inch 5 Installation instructions 1 Parts catalog 1 1. Park the machine on a level surface, stop the engine, engage the parking brake and remove the key from the ignition switch. 2.
PAGE 2
Figure 3 1. Emblem bracket 2. SMV emblem 3. Bracket strap 6. Mount the SMV emblem to the back of the emblem bracket with (2) 1/4 x 3/4 inch machine screws and 1/4 inch flange nuts (Figure 3). 7. Reinstall the storage housing and secure the mounting bracket to the machine’s frame with the fasteners previously removed. Make sure the notches on the bottom edge of the storage housing are positioned over the (2) frame bolts.