Installation Instructions

ManualsBrandsToro ManualsLawn MowersToro 115-4463

FormNo.3360-215RevA

BBCBailKit

21inHeavy-DutyHi-VacWalk-BehindLawnMower

ModelNo.115-4463

InstallationInstructions

InstallingtheKit

1.Removethe2boltsthatholdtheBBCbaillatch,the

2curvedwashers,andthespringtothehandle.

Note:DiscardtheBBCbaillatch,curvedwashers,

andthespring.

2.Removethe2nutsthatholdthebladecontrolbail

tothehandle.

3.Removethebladecontrolbail.

4.Removetheouterbushing,thetractioncontrolbail,

andtheinnerbushing.

Note:Discardthebladecontrol(upper)bailand

the2bushings.

5.DisconnecttheBBCcablefromthethrottle/choke

controlassembly.

Note:Removetheretainingringandsaveit.

6.Removethethrottle/chokecontrolandthecurved

washersfromthehandle.

Note:Discardthecurvedwashers.

7.Installthethrottle/chokecontrolontothehandle

usingthenewcurvedwashers.

8.InstalltheBBCcablebracketwithanewcurved

washer.

Note:Tightentheboltonthethrottle/choke

controlassemblyrst,thentightentheboltonthe

handle.

9.AttachtheBBCcabletotheBBCcablebracket.

10.Slidetheatwasher,bushing,BBCbaillatch,spring,

andcurvedwasherontoabolt.

11.InstalltheBBCbaillatchassemblyandtheground

speedselectorontothehandle.

Note:Leavethespringunhooked.

Note:Torquetheboltto30–50in-lb.

12.Inserttheboltandabushingthroughthespringand

thecurvedwasherandthenintothehandle.

Note:Torquetheboltto30–50in-lb.

13.Installthespring,thetractioncontrolbail,andthe

spaceronthehandle.

14.Hookthecableontothebladecontrolbail.

15.Installthebladecontrolbailontothehandle.

Note:Ensurethatyouengagethespring,withone

endofthespringunderthegroundspeedselector

plateandtheotherendofthespringhookedonto

thebladecontrolbailtab(Figure1).

Figure1

1.Springendbehindthe

bladecontrolbailtab

4.Bladecontrolbailtab

2.Springendunderthe

groundspeedselector

plate

5.BBClatchspring

3.Groundspeedselector

16.Installthe2nutstosecurethebladecontrolbailand

thetractioncontrolbail.

Note:Torquethenutsto50–110in-lb.

17.HookthespringontheBBCbaillatch(Figure1).

18.CheckthatthebladecontrolbailandtheBBCbail

latchoperateproperly.

19.Removethefueltank.RefertoEmptyingtheFuel

TankandCleaningtheFuelFilterintheOperator’s

Manual.

20.Removethe2beltcoversontopofthemower

housing.

Note:Thereisascrewunderthereardoorthatyou

mustremove.

21.Loosenthecableclampscrewuntilthebrakecable

conduitslides(Figure2).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

Summary of content (2 pages)

PAGE 1
Form No. 3360-215 Rev A BBC Bail Kit 21in Heavy-Duty Hi-Vac Walk-Behind Lawn Mower Model No. 115-4463 Installation Instructions Installing the Kit 15. Install the blade control bail onto the handle. 1. Remove the 2 bolts that hold the BBC bail latch, the 2 curved washers, and the spring to the handle. Note: Discard the BBC bail latch, curved washers, and the spring. 2. Remove the 2 nuts that hold the blade control bail to the handle. 3. Remove the blade control bail. 4.
PAGE 2
5. Install the belt covers. 26. Install the fuel tank. Replacing the Blade Brake Spring 1. Remove the 2 blade nuts, anti-scalp cup, blade, blade retainer, and clutch shield disc. 2. Remove the 4 screws that hold the blade brake clutch shield in place. 3. Remove the blade brake clutch shield. 4. Remove the blade brake spring. 5. Install the new blade brake spring. 6. Install the blade brake clutch shield using the 4 screws that you previously removed. Figure 2 1. Spring 2. Brake cable conduit 3.