Installation Instructions

FormNo.3360-632RevA
LiftArmProtectionKit,
SandPro/IneldProAttachments08751,08753,08756and
108-9427
ModelNo.115-5607
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Wearpad1
Tubewearpad1
Clamp
1
Screw
2
Flangenut2
Installationinstructions1
1
Partscatalog1
1
Partsneededforthisprocedure:
1Wearpad
1Tubewearpad
1
Clamp
2
Screw
2Flangenut
1Installationinstructions
1Partscatalog
Procedure
1.Parkthemachineonalevelsurface,lowerthe
attachmentandturntheengineoff.Removethekey
fromtheignitionswitch.
2.Locatethetwoholesintheliftarmbarthatare
directlyunderthetractionunitrearframetube
(Figure1).
Figure1
1.Wearpad
4.Clamp
2.Liftarmbar5.Curvedwearpad
3.Tractionunitrearframe
tube
3.Usingtheholesprovided,mountthewearpadtothe
liftarmbarwithtwoangeheadboltsandange
nuts.Positionthewearpadontheliftarmasshown
inFigure1.
4.Directlyabovetheliftarm,looselymountthetube
wearpadtotheundersideoftheframetubewiththe
clamp(Figure1).Offsettheclamponthewearpad
soitdoesnotcontacttheliftarmduringoperation
oftheattachment.
Note:Thetubewearpadisonlyrequiredifthetube
hasbeendamagedfromtheliftarmbar.
5.Tightenallthenuts.
©2008—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved