Installation Instructions

FormNo.3362-682RevA
RearRollerScraperKit
22inRotaryCuttingUnit
ModelNo.117–0149
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Scraper
1
Scraperplate
2
Bolt(3/8x3/4inch)
2
Preparethemower.
PreparingtheMower
1.Positionthemachineonalevelsurface,lowerthe
cuttingdecks,stoptheengine,engagetheparking
brakeandremovethekeyfromtheignitionswitch.
2.Removethegreasezerk/boltfromtherollermount.
Keepthegreasezerk/boltforassembly
3.Looselymounteachendofthescraperandascraper
platetoeachrollermountwiththepreviously
removedgreasezerk/boltandabolt(3/8x3/4
inch)(
Figure1).
4.Slidethescraperupordownuntilagapof.020-.040
inchesisachievedbetweentherodandtheroller.
Tightenthegreasettingstolockadjustment.
Torquethemto30ft.-lb.(41N-m).
g012070
1 4 2
3
5
Figure1
1.Rearroller
4.Scraperplate
2.Scraper5.Greasezerk/bolt
3.Rollermount
g012069
1
2
3
Figure2
1.Rollerscraper
3.Greasetting
2.Mountingscrew
©2009—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved