Installation Instructions

FormNo.3361-396RevA
HydraulicHoseKit
forCuttingUnitsforReelmaster3100-DTractionUnit
ModelNo.117-2724
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Hydraulichoseassembly(95–8836)
2
Hydraulichoseassembly(95–8835)
2
Hydraulichoseassembly(95–8837)
2
Hydraulichoseassembly(95–8826)
1
Hydraulichoseassembly(95–8827)
1
Hydraulichoseassembly(95–8828)
1
O-ring[ORFS-8](237–30)
8
O-ring[ORFS-10](237–65)
4
O-ring[ORB-6](237–42)
2
O-ring[ORFS-4](237–21)
2
O-ring[ORFS-6](237–22)
2
Installthekit.
InstallingtheKit
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.
•Makesureallhydraulicuidhosesand
linesareingoodconditionandallhydraulic
connectionsandttingsaretightbefore
applyingpressuretothehydraulicsystem.
•Keepyourbodyandhandsawayfrompin
holeleaksornozzlesthatejecthighpressure
hydraulicuid.
•Usecardboardorpapertondhydraulic
leaks.
•Safelyrelieveallpressureinthehydraulic
systembeforeperforminganyworkonthe
hydraulicsystem.
•Getimmediatemedicalhelpifuidis
injectedintoskin.
1.Locateandremovethehosestobereplacedas
showninFigure1.
Note:Whenremovingtheoldhoses,remember
howtheywereroutedthroughthecomponentsin
themachine.
2.ReplacetheoldhosesandO-ringswiththe
appropriatenewones.Thepartnumberofeachnew
hoseisshowninFigure1.
Important:Beforeinstallinganyhydraulic
hoses,makesurethecorrectO-ringsarein
positionandlubricatedwithhydraulicoil.
©2009—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved