Installation Instructions

FormNo.3361-371RevA

EngineReplacement

2009andBeforeProCoreProcessor

ModelNo.117–2734

InstallationInstructions

RefertoyourToroOperator’sManual,theToroService

ManualandtheBriggsandStrattonServiceManualfor

informationonengineandcomponentreplacementand

adjustment.

Note:Onthenewengine,setthelowidlespeedto

1550rpmandthetopspeed(noload)to3600rpm.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

PAGE 1
Form No. 3361-371 Rev A Engine Replacement 2009 and Before ProCore Processor Model No. 117–2734 Installation Instructions Refer to your Toro Operator’s Manual, the Toro Service Manual and the Briggs and Stratton Service Manual for information on engine and component replacement and adjustment. Note: On the new engine, set the low idle speed to 1550 rpm and the top speed (no load) to 3600 rpm. © 2008—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com.