Installation Instructions

2
RemovingtheBreather
NoPartsRequired
Procedure
1.Locatethehydraulictankbreathermountedto
theframetubejustaheadoftheaircleaner
mountingbracket(Figure1).Removethecable
tiesecuringthebreathertotheframetube.
g011176
Figure1
1.Hydraulictankbreather4.Breatherhose
2.Cabletie
5.Hoseclamp
3.Straighttting
2.Removethehoseclampsecuringthestraight
ttingandthebreathertothehose(Figure1).
3.Removethettingandbreatherfromthehose
andretainthebreatherforinstallationlater.
3
InstallingtheOverowTank
withKubota
©
Engines
Partsneededforthisprocedure:
1Hose
1Hoseclamp
1
Hoseclamp(5/16inchhose)
2
Screw(5/16x3-1/4inch)
2Washer
2
Nut(5/16inch)
Procedure
1.UsethedimensionsshowninFigure2,tolocate,
mark,anddrill2holeswitha9mm(11/32inch)
diameterintheframetube.
Note:Usethecenterofthefrontaircleaner
mounting-bracketboltforreference.
g011177
Figure2
1.3.8cm(1-1/2inches)3.16mm(5/8inch)
2.5.7cm(2-1/4inches)4.9mm(11/32inch)
diameter
2.Mounttheaccumulatortotheframewith2
screws(5/16x3-1/4inch),2washers,and2
angenuts(Figure3).
Note:Mounttheaccumulatortotheinsideof
theframetokeepthehardwareawayfromthe
aircleaner.
2