Installation Instructions

ManualsBrandsToro ManualsRiding ProductsCE Latch Kit, Groundsmaster 3500/3505/4500/4700 and Reelmaster 3100 Traction Unit

FormNo.3419-931RevA

CELatchKit

Groundsmaster

3500/3505/4500/4700andReelmaster

3100

TractionUnit

ModelNo.119-2004

InstallationInstructions

Installation

Description

Qty.

PartNumber

Lockbracket1ToroPartNo.119-2003

Rivet2ToroPartNo.107-0333

Washer2ToroPartNo.3296-10

Screw(1/4x2inch)

1ToroPartNo.322-10

Locknut(1/4inch)

1ToroPartNo.3296-47

CEDecal

1ToroPartNo.93-7252

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutofftheengineandremovethekey.

4.Unhookthehoodlatchfromthehoodlatch

bracket(Figure1).

g009984

Figure1

1.Hoodlatch

5.Removethe(2)rivetssecuringthehoodlatch

brackettothehood(Figure2).Removethe

hoodlatchbracketfromthehood.

g010379

Figure2

1.Hoodlatchbracket2.Rivets

6.Whilealigningthemountingholes,positionthe

CElockbracketandthehoodlatchbracketonto

thehood.Thelockbracketmustbeagainstthe

hood(Figure3).Donotremoveboltandnut

assemblyfromthelockbracketarm.

g012629

Figure3

1.CElockbracket

2.Boltandnutassembly

7.Alignthewasherswiththeholesontheinsideof

thehood.

8.Rivetthebracketsandthewasherstothehood

(Figure3).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3419-931*A

Summary of content (2 pages)

PAGE 1
Form No. 3419-931 Rev A CE Latch Kit Groundsmaster® 3500/3505/4500/4700 and Reelmaster® 3100 Traction Unit Model No. 119-2004 Installation Instructions Installation Description Qty. Part Number Lock bracket 1 Toro Part No. 119-2003 Rivet 2 Toro Part No. 107-0333 Washer 2 Toro Part No. 3296-10 Screw (1/4 x 2 inch) 1 Toro Part No. 322-10 Locknut (1/4 inch) 1 Toro Part No. 3296-47 CE Decal 1 Toro Part No. 93-7252 1. Park the machine on a level surface. 2. Engage the parking brake.
PAGE 2
9. Hook the latch onto the hood latch bracket (Figure 4). 11. Install the CE decal to the hood near the latch in a visible place (Figure 6). g012630 Figure 4 1. Hood latch 10. Screw the bolt into the other arm of hood lock bracket to lock the latch in position (Figure 5). Tighten bolt securely but do not tighten the nut. g233997 Figure 6 1. CE decal g012631 Figure 5 1. Bolt 2. Nut 3. Arm of hood lock bracket 2 2.