Installation Instructions

FormNo.3364-369RevB

EngineReplacement

2006andBeforeSandPro/IneldPro5020TractionUnits

ModelNo.117–2732

ModelNo.119–2465

InstallationInstructions

RefertoyourToroOperator’sManual,theToroService

Manual,andtheBriggsandStrattonServiceManualfor

informationonengineandcomponentreplacementand

adjustment.

Note:Removetheblowerhousing,ywheel,governor

springsandtheaircleanersupportbracketfromtheold

engineandinstallthemonthenewengine(

Figure1).

Figure1

1.Blowerhousing

4.Governorspring

2.Aircleanersupportbracket

5.Governorspring

3.Governorspring

6.Flywheel

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

PAGE 1
Form No. 3364-369 Rev B Engine Replacement 2006 and Before Sand Pro/Infield Pro 5020 Traction Units Model No. 117–2732 Model No. 119–2465 Installation Instructions Refer to your Toro Operator’s Manual, the Toro Service Manual, and the Briggs and Stratton Service Manual for information on engine and component replacement and adjustment. Note: Remove the blower housing, flywheel, governor springs and the air cleaner support bracket from the old engine and install them on the new engine (Figure 1).