Installation Instructions

FormNo.3370-322RevA

TaperedNozzleKit

RectangularNozzleKit

ProForceDebrisBlower

ModelNo.119-6280

ModelNo.119-6281

InstallationInstructions

Installation

AssemblingtheNozzle

Extension

Assemblethenozzleextensionhalvestogetherusing

6bolts,6angenuts,and2handlesasshownin

Figure1orFigure2.

G017445

Figure1

Taperednozzleextensionshown

1.Nozzleextensionhalf(2)3.Handle(2)

2.Bolt(6)4.Nut(6)

G017446

Figure2

Rectangularnozzleextensionshown

1.Nozzleextensionhalf(2)3.Handle(2)

2.Bolt(6)4.Nut(6)

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

PAGE 1
Form No. 3370-322 Rev A Tapered Nozzle Kit Rectangular Nozzle Kit Pro Force Debris Blower Model No. 119-6280 Model No. 119-6281 Installation Instructions Installation Assembling the Nozzle Extension Assemble the nozzle extension halves together using 6 bolts, 6 flange nuts, and 2 handles as shown in Figure 1 or Figure 2. 1 1 2 2 3 3 4 G017446 G017445 Figure 2 Rectangular nozzle extension shown Figure 1 Tapered nozzle extension shown 1. Nozzle extension half (2) 3. Handle (2) 2. Bolt (6) 4.
PAGE 2
Installing the Nozzle Extension 1. Slide the nozzle extension onto the nozzle, aligning the hole in each handle with the upper and lower holes in each attachment bracket on the nozzle (Figure 3). 2 1 G017447 Figure 3 1. Hole in handle 2. Holes in attachment bracket 2. Insert the hitch pins through the holes in the attachment brackets and the handles to secure the nozzle extension to the nozzle end (Figure 4). 1 2 3 4 G017448 Figure 4 1. Nozzle 3. Hitch pin 2. Nozzle extension 4.