Installation Instructions

FormNo.3369-584RevA

WeightKit

Greensmaster3300/3400Series

ModelNo.119-7129

InstallationInstructions

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Wheelweight1

Weightplate4

Locknut4

Thrustwasher2

Stud

Wheelweightadapter2

Hex-headscrew2

Installthekit.

Figure1

1.Locknut(4)5.Wheelweightadapter(2)

9.Jackpoint

2.Thrustwasher(2)6.Lugnut(4)10.Castorfork

3.Stud(2)7.Hexheadbolt(2)11.Weightplates(4)

4.Wheelweight

8.Spindle

1.Parkthemachineonalevelsurface.2.Stoptheengine,waitforallmovingpartstostop,set

theparkingbrake,andremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

PAGE 1
Form No. 3369-584 Rev A Weight Kit Greensmaster 3300/3400 Series Model No. 119-7129 Installation Instructions Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Wheel weight Weight plate Locknut Thrust washer Stud Wheel weight adapter Hex-head screw 1 4 4 2 2 2 2 Install the kit. Figure 1 1. 2. 3. 4. Locknut (4) Thrust washer (2) Stud (2) Wheel weight 1. Park the machine on a level surface.
PAGE 2
3. Raise the machine with a jack at the jack point (Figure 1). 4. Remove the 4 lug nuts on the wheel in pairs positioned diagonally from each other (Figure 1). 5. Remove the tire and set it aside to be installed later. 6. Remove the 2 retaining bolts that secure the spindle to the castor fork (Figure 1). 7. Mount 4 weight plates from the kit to the right-hand side of the castor fork with 2 hex-head bolts (1/2 x 6 inch) and 2 locknuts from the kit (Figure 1).