Installation Instructions

ManualsBrandsToro ManualsRiding ProductsFabric Backrest Extension Kit, Grammer Seat for Toro Commercial Traction Unit

FormNo.3365-301RevB

BackrestExtensionKit

GrammerSeatforToro

CommercialTractionUnit

ModelNo.119-7718

ModelNo.119-7719

InstallationInstructions

Installation

1.Positionthemachineonalevelsurface,lowerthe

cuttingunit(s),stoptheengine,engagetheparking

brakeandremovethekeyfromtheignition.

2.Loosenthetwoscrewssecuringtheseatcushionto

theseatback(Figure1).

Figure1

1.Screws(2)2.Plugs(2)

3.Removethetwoplugsfromtheholesinthetopof

theseatcushion(Figure1).Iftheplugscannotbe

easilyremovedfromthetopoftheseat,loosenthe

twoseatbackscrewssomemore.

4.Inserttworubberwashersontoeachbackrest

extensionbushing(

Figure2).

Figure2

1.Backrestextension

bushing(2)

2.Rubberwasher(2oneach

bushing)

5.Insertabackrestextensionbushingintoeachholeon

thetopoftheseat(Figure2).Makesuretheratchet

pinsinsidethebushingsarepositionedtowardthe

centeroftheseatback(Figure3).

Figure3

1.Bushingratchetpins

6.Tightenthetwoscrewssecuringtheseatcushionto

theseatback.

7.Insertthebackrestextensiontubesintothebushings

andadjusttothedesiredheight(

Figure4).

Figure4

1.Backrestextension

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Summary of content (1 pages)

PAGE 1
Form No. 3365-301 Rev B Backrest Extension Kit Grammer Seat for Toro® Commercial Traction Unit Model No. 119-7718 Model No. 119-7719 Installation Instructions Installation 1. Position the machine on a level surface, lower the cutting unit(s), stop the engine, engage the parking brake and remove the key from the ignition. 2. Loosen the two screws securing the seat cushion to the seat back (Figure 1). Figure 3 1. Bushing ratchet pins 6. Tighten the two screws securing the seat cushion to the seat back.