Installation Instructions

ManualsBrandsToro ManualsAttachmentsHose Plug Kit, Greensmaster 3400 TriFlex Traction Unit

FormNo.3369-950RevA

HosePlugKit

Greensmaster

3400TriFlex™TractionUnit

ModelNo.120-2029

InstallationInstructions

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Hoseplug1

Hoseclamp1

Installthekit.

InstallingtheKit

1.Parkthemachineonalevelsurface,turnoffthe

engine,removetheignitionkey,andsettheparking

brake.

2.Removethe4bolts,4atwashers,4rubberwashers,

and4spacersthatsecurethecovertothehydraulic

oiltank(

Figure1).

3.Loosenthehoseclampthatisclosesttothecover

(Figure1).

4.Removethecoverfromthehydraulictank,leaving

thehoseattachedtothecover.

5.Inserttheplugintotheopenendofthehoseuntil

theplugstopsinthehoseagainsttheneckthat

protrudesfromthehydraulicoiltank(

Figure1).

6.Slipahoseclampfromloosepartsoverthehose,but

donottightentheclamp.

7.Slipthehoseclampthatyoupreviouslyremoved

overthehoseend.

8.Inserttheopenendofthehoseoverthebarbon

thecover.

9.Securethehoseendbytighteningtheendhose

clamp.

10.Installthecoverontothehydraulicoiltankwith

the4bolts,4atwashers,4rubberwashers,and4

spacersthatyoupreviouslyremoved.

11.Positionthelooseclampinthemiddleofthehose

overtheplugandtightentheclamp.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

Summary of content (2 pages)

PAGE 1
Form No. 3369-950 Rev A Hose Plug Kit Greensmaster® 3400 TriFlex™ Traction Unit Model No. 120-2029 Installation Instructions Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Hose plug Hose clamp 1 1 Install the kit. Installing the Kit 1. Park the machine on a level surface, turn off the engine, remove the ignition key, and set the parking brake. 2.
PAGE 2
Figure 1 1. Hydraulic oil tank 2. Cover 3. Bolt (4) 5. Rubber washer (4) 6. Spacer (4) 7. Hose clamp (do not loosen) 4. Flat washer (4) 8. Hose plug 2 9. Hose 10. Hose clamp (from loose parts kit) 11. Hose clamp (loosen this clamp to disconnect the cover from the hydraulic oil tank) 12.