Installation Instructions

ManualsBrandsToro ManualsAttachmentsWeight Transfer Kit, Groundsmaster 360 Multi-Purpose Machine

FormNo.3369-240RevA

WeightTransferKit

Groundsmaster360Multi-PurposeMachine

ModelNo.120-6683

InstallationInstructions

Installation

Note:Theweighttransferkitistobeusedin

conjunctionwiththeQuickAttachFrontFrame,Model

30509,whenoperatingheavyturfpurposedattachments

suchasaailmower.Theweighttransferkitisnot

advisedforattachmentswhengroundengagementis

requiredsuchassnowremoval.

1.Parkthemachineonalevelsurface,applythe

parkingbrake,switchofftheengineandremovethe

ignitionkey.

2.Topreventcontaminationfromenteringthe

manifold,cleantheareaaroundthebottomright

portontheQuickAttachFrontFramemanifold

(

Figure1).Thisistherecessedport.

Figure1

1.Plug2.Loadcontrolvalve

3.Removeanddiscardtheplugfromthebottomof

themanifold(Figure1).

Note:MakesuretheO-ringsontheloadcontrol

valveareinplaceandlubricatedwithhydraulicoil

beforeinstallation.

4.Installtheloadcontrolvalveintothemanifoldport

(

Figure1).Torquethevalveto25ft-lb(34N-m).

5.Locatethecappedwireharnessconnectornextto

theelectricalaccessorykitcontroller(Figure2).

6.Removethecapfromthewireharnessconnector

(Figure2).Storethecapinamemorableplace.

Figure2

1.Wireharnessconnector

3.Weighttransferconnector

2.Cap

7.Plugtheweighttransferconnector(includedwith

kit)intothewireharnessconnector(Figure2).

Note:Unplugtheweighttransferconnectorfrom

thewireharnessconnectorwhennotoperating

heavyturfpurposedattachments.Reinstallthecap

intothewireharnessconnector.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Summary of content (2 pages)

PAGE 1
Form No. 3369-240 Rev A Weight Transfer Kit Groundsmaster 360 Multi-Purpose Machine Model No. 120-6683 Installation Instructions Installation Note: The weight transfer kit is to be used in conjunction with the Quick Attach Front Frame, Model 30509, when operating heavy turf purposed attachments such as a flail mower. The weight transfer kit is not advised for attachments when ground engagement is required such as snow removal. 3. Remove and discard the plug from the bottom of the manifold (Figure 1).
PAGE 2
Operation Adjusting the Weight Transfer The purpose of the weight transfer valve is to minimize the ground engagement force of the attachment. 1. Remove the cap from the top of the load control valve (Figure 3). Figure 3 1. Cap 2. Allen wrench 3. Jam nut 2. Loosen the jam nut on the valve (Figure 3). 3. Using an Allen wrench, rotate the valve clockwise to reduce the ground pressure and counter clockwise to increase the ground pressure. 4. Tighten the jam nut and install the cap.