Installation Instructions

FormNo.3375-168RevA

Slow-MovingVehicleKit

Groundsmaster

3280-Dand7200SeriesTractionUnit

ModelNo.120-6809

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

Thisproductcontainsachemicalorchemicals

knowntotheStateofCaliforniatocausecancer,

birthdefects,orreproductiveharm.

Installation

Groundsmaster7200/7210Installation

1.Positionthemountingbracketontotheframecross

membersothenotchtsaroundtheframeboltand

thefrontofthebracketisparalleltothecrossmember

(Figure1).

G022010

Figure1

1.Mountingbracket2.Framebolt

2.Usingtherearholesinthebracketasatemplate,locate,

markanddrill(2).280inchdiameterholesintheframe

crossmember(Figure2).Holesmayalreadybeinthe

crossmember.

G022012

Figure2

1.Markanddrilltheseholes

3.Mountthebrackettothecrossmemberwithtwo

screwsandnuts(

Figure3).

G02201 1

Figure3

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3375-168*A

PAGE 1
Form No. 3375-168 Rev A Slow-Moving Vehicle Kit Groundsmaster® 3280-D and 7200 Series Traction Unit Model No. 120-6809 Installation Instructions 2. Using the rear holes in the bracket as a template, locate, mark and drill (2) .280 inch diameter holes in the frame cross member (Figure 2). Holes may already be in the cross member.
PAGE 2
4. Mount the slow moving vehicle emblem to the top holes in the bracket with two screws and nuts (Figure 4). 3. Position the mounting bracket onto the hood, aligning the holes with the holes in the hood (Figure 6). 1 2 3 G022013 Figure 4 Groundsmaster 3280 Installation G022014 1. Release the latches and open the hood. Figure 6 2. Remove the (2) screws securing the hood handle to the hood. Remove the handle (Figure 5). 1. Mounting bracket 3. Slow moving vehicle emblem 2. Hood handle 1 4.