Installation Instructions

FormNo.3369-451RevB

SpringUpgradeKit

Multi-Pro

TurfSprayerwithCoveredBoomKit

ModelNo.120-8508

InstallationInstructions

InstallingtheSprings

1.Parkthemachineonalevelsurface,lowerthebooms,

andsupporttheendswithjackstands.

2.Settheparkingbrake,stoptheengine,andremovethe

key.

3.Removeanddiscardthelocknut,springretainer,spring,

andsheathfromoneofthefourboompivotbolts.

Figure1

1.Locknut

3.Spring

2.Springretainer4.Sheath

4.Installaexiblesleeveoveroneofthenewsprings.

5.Installthesleeveandspringassembly,springretainer,

andlocknutontotheboompivotbolt.Tightenthe

locknutuntilatleasttwothreadsareshowingandthe

locknutcontactsthespringretainer.

Figure2

1.Boompivotbolt

4.Springretainer

2.Spring

5.Locknut

3.Flexiblesleeve

6.Repeatsteps3through5fortheother3boompivot

bolts.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3369-451*B

PAGE 1
Form No. 3369-451 Rev B Spring Upgrade Kit Multi-Pro® Turf Sprayer with Covered Boom Kit Model No. 120-8508 Installation Instructions Installing the Springs 1. Park the machine on a level surface, lower the booms, and support the ends with jack stands. 2. Set the parking brake, stop the engine, and remove the key. 3. Remove and discard the locknut, spring retainer, spring, and sheath from one of the four boom pivot bolts. Figure 2 1. Boom pivot bolt 4. Spring retainer 2. Spring 5. Locknut 3.