Installation Instructions

FormNo.3372-670RevA
ScraperKit
WideWiehleRollerforGreensmaster
®
800Walk-BehindMower
ModelNo.121-2617
InstallationInstructions
1.Placemoweronalevelsurface.Removethegrass
basketifinstalled.
2.AttheHeight-of-Cut(HOC)arms,loosenthejamnuts
androllermountingscrewswhichsecuretherolleraxle
totheHOCarms.
3.Rotateeachrolleraxlesothatthecross-shafthole
(Figure1)islevel.Atoneendoftheroller,lightly
tightentherollermountingscrew.
4.Threadthescraperadjustment-nuts(Figure1)onto
thescrapermountingstudsateachendofthescraper
assembly.Positionthescraperlock-washersonthe
mountingstuds,andagainsttheadjustmentnuts.
G018189
5
1
2
3
4
6
Figure1
1.Scraperassembly4.Axlecross-shafthole
2.Scraperadjustment-nut
5.Rolleraxle
3.Lock-washer
6.Scraperlocknut
5.Insertthescrapermountingstudsthroughtheaxle
cross-shaftholesfromtheforwardsideoftheroller.
Looselysecurescraperwithlock-washerandscraper
locknut.
6.Rotatethescraperadjustment-nuttoobtainaclearance
betweenthescraperandrollerof0.030‒0.070inch
(0.762‒1.778mm)acrossthewidthofthescraper.
Tightenthescraperlocknut.
7.Loosentherollermountingscrew ,tightenedinstep
3,
androtatethescraperassembly(Figure2)toposition
itbehindtheroller.
Note:FormowerswiththeGroomerReelKit
installed,ensurethatthereisclearancebetweenthe
scraperassemblyandthegroomerblades.
G018210
1
2
3
4
4
5
Figure2
1.Frontofmachine
4.WideWiehleRoller
2.Scraperpositionwithout
groomer
5.Groomer
3.Scraperpositionwith
groomer
8.Centertheroller/scraperassemblybetweentheHOC
arms.
9.AttheHeight-of-Cut(HOC)arms,tightentheroller
mountingscrewsandthejamnutswhichsecurethe
rolleraxletotheHOCarms.
10.Installgrassbasketifremovedinstep
1.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved