Installation Instructions

ManualsBrandsToro ManualsRiding EquipmentToro 121-5681

FormNo.3371-631RevA

SpindleKit

TITAN

Zero-Turn-RadiusRidingMower

ModelNo.121-5680

ModelNo.121-5681

InstallationInstructions

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemower.

Spindlehousing

Washer(.88inchO.D.)

Installthespindlehousing.

PreparingtheMower

NoPartsRequired

Procedure

1.Thoroughlycleanmowerdeck.Alldebrismust

beremovedtoensurethespindlehousingwillt

properlyagainstmowerdeck.

2.Repairallbentordamagedareasofmowerdeckand

replaceanymissingparts.

InstallingtheSpindleHousing

Partsneededforthisprocedure:

Spindlehousing

Washer(.88inchO.D.)

Procedure

WARNING

Whilemaintenanceoradjustmentsarebeingmade,

someonecouldstarttheengine.Accidentalstarting

oftheenginecouldseriouslyinjureyouorother

bystanders.

Removethekeyfromtheignitionswitch,engage

parkingbrake,andpullthewire(s)offthespark

plug(s)beforeyoudoanymaintenance.Alsopush

thewire(s)asidesoitdoesnotaccidentallycontact

thesparkplug.

1.Parkthemachineonalevelsurface,disengagethe

bladecontrolswitch,andmovethemotioncontrol

leversoutwardtotheneutralpositionandengage

parkingbrake.

2.Stoptheengineandremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Summary of content (2 pages)

PAGE 1
Form No. 3371-631 Rev A Spindle Kit TITAN® Zero-Turn-Radius Riding Mower Model No. 121-5680 Model No. 121-5681 Installation Instructions Note: Determine the left and right sides of the machine from the normal operating position. Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 Description No parts required – Spindle housing Washer (.88 inch O.D.) 1 1 Use Qty. Prepare the mower. Install the spindle housing.
PAGE 2
3. Allow the machine to cool before starting these instructions. 1 4. Raise the deck to the transport position. Lift the front of the machine and support using jack stands or equivalent support. 2 3 CAUTION 4 Raising the mower deck for service or maintenance relying solely on mechanical or hydraulic jacks could be dangerous. The mechanical or hydraulic jacks may not be enough support or may malfunction allowing the machine to fall, which could cause injury.