Installation Instructions

FORM NO. 3319-625
INSTALLATION
INSTRUCTIONS
PART NO. 98-2392
SWITCH KIT
Loose Parts
Note: Use the chart below to identify parts used for assembly.
DESCRIPTION QTY. USE
Switch 1 Install replacement switch
Decal 1 Install on rear of tractor hood
Install Switch
1. Remove wire harness connector from existing
switch.
2. Squeeze switch barbs together and remove
existing switch from tractor, discard.
3. Align new switch in opening and press into
position until barbs snap into locked position.
4. Plug wire harness terminal onto switch
terminals.
Install Decal
1. Remove backing and install decal to rear of
tractor hood in a very visible location (Fig. 1).
Figure 1