Installation Instructions

Table Of Contents

FormNo.3406-194RevA

WireHarnessKit

Groundsmaster

360,4000,5900,orReelmaster

5010Series

TractionUnitwith2PostROPSExtension

ModelNo.122-0729

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installthewireharnesskittothe2-postROPSextensionwhenyouneedtoprovidepowertoelectricalaccessories.

PreparingtheMachine

1.Movethemachinetoalevelsurface.

2.Settheparkingbrake,shutofftheengine,andwaitforallmovingpartstostopbeforeyouleavethemachine.

3.Removethekeyfromtheignitionswitch.

4.Ensurethatthemachineissecurefrommovementbeforeyoubegintheinstallation.

5.Disconnectthenegative(–)cablefromthebattery.

RemovingtheTop

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3406-194*A

PAGE 1
Form No. 3406-194 Rev A Wire Harness Kit Groundsmaster® 360, 4000, 5900, or Reelmaster® 5010 Series Traction Unit with 2 Post ROPS Extension Model No. 122-0729 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Install the wire harness kit to the 2-post ROPS extension when you need to provide power to electrical accessories. Preparing the Machine 1.
PAGE 2
Installing the Fuse Block 2x 2x Installing the Ground Block 1x 1x 2x 2 2x
PAGE 3
Routing and Securing the Wire Harness 10x 3
PAGE 4
Connecting the Wire Harness to the Ground Block Connecting the Wire Harness and Battery Installing the Top 4