Installation Instructions

FormNo.3376-705RevC

FrontScraperKitforNarrowWiehleRoller

21inDPAGreensmaster

CuttingReel

ModelNo.125-3503

ModelNo.125-3504

ModelNo.125-3505

ModelNo.139-4385

ModelNo.139-4394

ModelNo.139-4398

ModelNo.139-7406

InstallationInstructions

Installation

PreparingtheMachine

NoPartsRequired

Procedure

RefertoyourcuttingunitOperator’sManualfor

instructionstopreparethemachineandcuttingunit

forinstallation.

InstallingtheScraper

Partsneededforthisprocedure:

Scraper

2Bolt

2Nut

Clamp

Procedure

1.Removetheplowbolt,washer,andnutsecuring

oneoftheheight-of-cutarmstothecuttingunit,

sideplate(Figure1).

2.Loosentherollermountingscrewsinthe

height-of-cutarms(Figure1).

3.Slidetheheight-of-cutarmofftherollershaft

(Figure1).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3376-705*C

PAGE 1
Form No. 3376-705 Rev C Front Scraper Kit for Narrow Wiehle Roller 21in DPA Greensmaster® Cutting Reel Model No. 125-3503 Model No. 125-3504 Model No. 125-3505 Model No. 139-4385 Model No. 139-4394 Model No. 139-4398 Model No.
PAGE 2
4. Slide the roller shaft out of the height-of-cut arm on the opposite end of the cutting unit. g021001 Figure 1 1. Plow bolt 2. Height-of-cut arm 4. Nut 5. Roller mounting screw 3. Washer 5. Insert a shaft clamp onto each end of the roller shaft (Figure 2). g020965 Figure 2 1. Scraper 2. Shaft clamp 6. Loosely install the roller to the cutting unit with the height-of-cut arm and fasteners previously removed. 7.