Installation Instructions

FormNo.3378-768RevA

ShockKit

Multi-Pro

5800TurfSprayer

ModelNo.127-2937

InstallationInstructions

Thekitincludesareplacementshockabsorberforaworn

ordamagedshockabsorber.

WARNING

CALIFORNIA

Proposition65Warning

Thisproductcontainsachemicalorchemicals

knowntotheStateofCaliforniatocausecancer,

birthdefects,orreproductiveharm.

Useofthisproductmaycauseexposureto

chemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orother

reproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nut2

Spacer

Bushing4

Shockabsorber

Sleeve

Washer2

Bolt2

Installingtheshockabsorber.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3378-768*A

PAGE 1
Form No. 3378-768 Rev A Shock Kit Multi-Pro® 5800 Turf Sprayer Model No. 127-2937 Installation Instructions The kit includes a replacement shock absorber for a worn or damaged shock absorber. WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
PAGE 2
Installing the Shock Absorber 6. Install the new shock absorber (Figure 4) by screwing it in on the same points as the old one was removed (Figure 2 and Figure 3). 1. Turn off the machine and allow it to cool. 2. Disconnect the negative battery cable from the battery. 7 3. Locate the wheel well of the front end of the machine. 6 3 5 4 3 2 1 1 g023338 Figure 1 1. Wheel well g023337 Figure 4 4. Raise the front end of the machine up, and support the front end with a suitable jack stand. 5.