Installation Instructions

FormNo.3397-716RevA
IntakeHoodKit
Workman
®
HDX-AutoUtilityVehicleCab
ModelNo.127-8692
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
MediaandAdditionalParts
Description
Qty.
Use
Intake-hoodassembly1Installtheintake-hoodassembly.
1.Parkthemachineonalevelservice,turnthemachine
off,andremovethekeyfromtheignition.
2.Removetheexistingnutssecuringtheexistingplate
(Figure1).
3.Insertthe2holesinthesideoftheintakehoodinto
theexistingboltsintheplate(Figure1).
4.Installthe2nutsontothebolts(Figure1).
Figure1
1.Nuts3.Bolts
2.Intakehood
5.ConnecttheCVTair-intakehoseintotheintakehood
(Figure2).
Note:Youmayneedtocutapproximately2.5cm(1
inch)offtheCVTair-intakehosetoensurethatitts
properlyintotheintakehood.
Figure2
1.Intakehood2.Intakehose
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3397-716*A