Installation Instructions

2
Installingthe10Gallon
Tank
NoPartsRequired
Procedure
1.Removetheexistingfuel-tankmountandinstall
thenew10gallontankmountusing4carriage
bolts(5/16inch)and4angenuts(5/16inch)
throughtheholesinthetrayasshowninFigure
2.
g345783
Figure2
1.Flangenut(5/16inch)
3.Fueltanktray
2.Fuel-tankmount
4.Carriagebolt(5/16inch)
Note:Installthenewmountsothatthetabsare
ontheoutsideofthefueltray.
2.Attachthecarbon-canisterbrackettotheframe
using2bolts(1/4inch)and2angenuts(1/4
inch)asshowninFigure3.
Note:Ifthebracketdoesnotperfectlylineup
withtheexistingholes,widenthemslightlyusing
a7cm(0.281inch)drillbit.
g035883
Figure3
1.Flangenut(1/4inch)3.Bolt(1/4inch)
2.Carbon-canisterbracket
3.Securethecarboncanistertothebracketusing
thecanisterstrapand2carriageboltsand
angenuts(3/8inch)asshowninFigure4.
g037084
Figure4
1.Bracket
4.Canisterstrap
2.Flangenut(3/8inch)5.Carboncanister
3.Carriagebolt
2