Operator's Manual

ManualsBrandsToro ManualsUtility VehicleToro 130-4457

FormNo.3407-669RevA

Standard-RangeExit-SideLockoutKit

2024DirectionalDrill

ModelNo.130-4457

Operator'sManual

Note:Thiskit(130-4457)containsthehandheld

transmitter(130-4458)andthereceiver(130-4459).Ifyou

arereceivingthiskitwithyourdrill,thereceiverisfactory

installedonthedrill.

Introduction

Theexit-sidelockouttransmitterandreceiveris

designedtoremotelystopandlockouttheusercontrols

ofadirectionaldrill.

Readthisinformationcarefullytolearnhowtooperateand

maintainyourmachineproperlyandtoavoidinjuryand

equipmentdamage.Youareresponsibleforoperatingthe

machineproperlyandsafely.

YoumaycontactTorodirectlyatwww .Toro.comforproduct

andaccessoryinformation,helpndingadealer,ortoregister

yourproduct.

Thismanualidentiespotentialhazardsandhassafety

messagesidentiedbythesafetyalertsymbol(Figure1),

whichsignalsahazardthatmaycauseseriousinjuryordeath

ifyoudonotfollowtherecommendedprecautions.

Figure1

1.Safetyalertsymbol

Thismanualuses2wordstohighlightinformation.

Importantcallsattentiontospecialmechanicalinformation

andNoteemphasizesgeneralinformationworthyofspecial

attention.

ThisproductcomplieswithallrelevantEuropeandirectives.

Fordetails,seetheseparateproduct-specicDeclarationof

Conformity(DOC)sheet.

Thisproductmaycontainmaterialthatmaybehazardousto

humanhealthandtheenvironment.IncompliancewithEU

Directive2002/96/EConWasteElectricalandElectronic

Equipment(WEEE):

•Donotdisposeoftheproductasunsortedmunicipal

waste.

•Thisproductshouldberecycledinaccordancewith

localregulations.Contactlocalauthoritiesfordetailed

information.

•Thisproductmaybereturnabletothedistributorfor

recycling.Contactyourdistributor/dealerfordetails.

FCCStatements

15.19–TwoPartWarning

ThisdevicecomplieswithPart15oftheFCCrules.Operation

issubjecttothefollowingtwoconditions:

(1)Thisdevicemaynotcauseharmfulinterferenceand

(2)Thisdevicemustacceptanyinterferencereceived,including

interferencethatmaycauseundesiredoperation.

15.21–UnauthorizedModication

NOTICE:Themanufacturerisnotresponsibleforany

unauthorizedmodicationstothisequipmentmadebytheuser.

Suchmodicationscouldvoidtheuser’sauthoritytooperate

theequipment.

15.105(b)–Note:

Thisequipmenthasbeentestedandfoundtocomplywith

thelimitsforaClassBdigitaldevice,pursuanttoPart15

oftheFCCRules.Theselimitsaredesignedtoprovide

reasonableprotectionagainstharmfulinterferenceina

residentialinstallation.Thisequipmentgenerates,usesand

canradiateradiofrequencyenergyand,ifnotinstalledand

usedinaccordancewiththeinstructions,maycauseharmful

interferencetoradiocommunications.However,thereis

noguaranteethatinterferencewillnotoccurinaparticular

installation.Ifthisequipmentdoescauseharmfulinterference

toradioortelevisionreception,whichcanbedeterminedby

turningtheequipmentoffandon,theuserisencouragedto

trytocorrecttheinterferencebyoneormoreofthefollowing

measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferent

fromthattowhichthereceiverisconnected.

IndustryCanadaStatement

ThisdevicecomplieswithCanadianRSS-210.

Theinstallerofthisradioequipmentmustensurethatthe

antennaislocatedorpointedsuchthatitdoesnotemitRFeld

inexcessofHealthCanadalimitsforthegeneralpopulation;

consultSafetyCode6,obtainablefromHealthCanada’s

websitewww.hc-sc.gc-ca/rpb.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3407-669*A

Summary of content (5 pages)

PAGE 1
Form No. 3407-669 Rev A Standard-Range Exit-Side Lockout Kit 2024 Directional Drill Model No. 130-4457 Operator's Manual Note: This kit (130-4457) contains the handheld transmitter (130-4458) and the receiver (130-4459). If you are receiving this kit with your drill, the receiver is factory installed on the drill. • This product should be recycled in accordance with local regulations. Contact local authorities for detailed information. • This product may be returnable to the distributor for recycling.
PAGE 2
Safety Product Overview Improperly using or maintaining this equipment can result in injury. To reduce the potential for injury, comply with these safety instructions.Toro tested this equipment for reasonably safe service; however, failure to comply with the following instructions may result in personal injury. Controls Exit-Side-Lockout System The exit-side-lockout system provides the individuals working around the machine with a means to disable the drill pipe from rotating and thrusting.
PAGE 3
Replacing the Transmitter Batteries Specifications Handheld Unit Batteries 3 AAA Auto shutdown After 2 hours of inactivity Low battery warning 3.3 V and below Low battery shutdown 3.1 V Operating temperature -20 to 55 degrees C (-4 to 131 degrees F) Storage temperature -40 to 55 degrees C (-40 to 131 degrees F) Radio frequency 2405 to 2480 MHz Radio RF power 2 mW (2.4 GHz) Radio license Not required Modulation DSSS Antenna Internal 1.
PAGE 4
complete, the yellow light turns off, the red light begins flashing, and the green light illuminates. All lights remain as mentioned until you release the button. 8. Release the ON button. The red light turns off and the green light flashes for a few seconds. Disassociating all Handheld Transmitters from the Base Unit Important: Completing this procedure will disassociate all transmitters from the base unit, which will need to be associated again before they will function. Figure 5 1.
PAGE 5