Installation Instructions

7
InstallingtheBackllBlade
Partsneededforthisprocedure:
1
Backllblade
2Retainerplate
6
Bolt(5/8x1-1/2inch)
12
Washer(5/8inch)
8Retainedshim
1
Tiltcylinder—retractedlength51.4cm(20.25inch);
roddiameter44.5mm(1.75inch)
2
Clevispin(1-1/4x4-7/16inch)
2Hairpin
InstallingtheBackllBladeontothe
LiftArms
Backllbladeweight:1302kg(291lb)
1.Useliftingequipmenttoliftthebackllbladeand
alignittothemountingplateofthelift-armassembly
(Figure33).
Note:Alignthepivotttingofthebackllbladeinto
thepivotbushingofthemountingplateofthelift-arm
assembly.
Figure33
1.Backllblade5.Bolt(5/8x1-1/2inch)
2.Mountingplate(lift-arm
assembly)
6.Pivottting
3.Retainerplate
7.Pivotbushing(mounting
plate)
4.Washer(5/8inch)
8.Up
2.Usejackstandstosupporttheliftingarms.
DANGER
Ajackcansuddenlyfailresultingininjuryor
death.
•Neverrelyonahydraulicjacktosupport
weightofcomponents.
•Donotplaceyourbodyunderanyelevated
component(s).
3.Assemblethebackllbladetothemountingplatewith
2retainerplatesand4bolts(5/8x1-1/2inch),and4
washers(5/8inch)andtightentheboltsuntiltheyare
handtight(Figure34).
15