Installation Instructions

ConnectingtheBattery
1.Assemblethepositive-batterycableintothepositive
studofthebattery(Figure2)withthelock-washernut
(3/8inch)thatyouremovedinstep6ofDisconnecting
theBattery(page1).
2.Torquethelock-washernutto(10to15ft-lb)andalign
theinsulatorbootoverthenutandstud.
3.Assemblethenegative-batterycableintothenegative
studofthebattery(Figure2)withthelock-washernut
(3/8inch)thatyouremovedinstep5ofDisconnecting
theBattery(page1).
4.Aligntheholesinthebatterycoverwiththeclipnuts
atthemountingangeforthecover(Figure1).
5.Securethebatterycovertothemachinewiththe4
ange-headbolts(5/16x1inch)thatyouremovedin
step3ofDisconnectingtheBattery(page1).
6.Installthenger-pullcoverintotheholesinthebattery
cover.
8
CompletingtheInstallationof
theKit
NoPartsRequired
Procedure
1.Rotatethebattery-disconnectswitchtotheOn
position;refertoOperator’sManualforthemachine.
2.Starttheengineandcheckforexhaustleaksatthe
turbocharger-exhaustpipeandthemufer.
Note:Repairallleaksbeforeinstallingthesidepanel.
3.Installtheright-sidepanel;refertoOperator’sManual
forthemachine.
11