Installation Instructions

3
RemovingtheExhaustSystem
NoPartsRequired
RemovingtheMuferandHeatShield
Note:Exhaustsystemweight:approximately39.5kg(88
lb).
1.Supporttheexhaustsystemwithliftingequipment
(Figure7).
Figure7
2.Removethebandclampandthelowerguillotineclamp
thatsecuresthemufertotheturbocharger-exhaust
pipe(Figure8).
Note:RetaintheclampsforinstallationinInstalling
theBellows-AlignmentJig(page5)andInstallingthe
GuillotineClampandtheBandClamp(page8).
Figure8
1.Flangenut4.Turbocharger-exhaust
pipe
2.Guillotineclamp5.Muferinletpipe
3.Bandclamp
3.Removethe4angelocknuts(8mm),4bolts(8x
120mm),andrearmountingplatethatsecurethe
exhaust-systemmounttothefrontrightROPStube
(Figure9).
Note:Retainthelocknuts,bolts,andmountingplate
forinstallationinAssemblingtheMufertothe
TurbochargerOutletPipe(page7).
Figure9
1.Bolts(8x120mm)
4.Exhaust-systemmount
2.Rearmountingplate
5.Flangelocknuts(8mm)
3.ROPStube
4.Separatethemuferfromtheturbocharger-exhaust
pipeandremovethemuferfromthemachine(Figure
10).
Note:Donotremovetheheatshieldfromthemufer.
4