Installation Instructions

Figure52
1.Bluewire(dashharness)3.Piggybackterminal(wiring
harnessforthemachine)
2.Socketterminal—black
(ground)wire(dash
harness)
4.Bladeterminal
(auxiliary-powerport)
3.Connectthepiggybackterminalofthewiringharness
forthemachineontotheopenbladeterminalofthe
auxiliary-powerport(Figure52).
4.Connectthe6-socketconnectorofthewiringharness
forthemachineontotheconnectorforthestarter
switch(Figure53).
Figure53
1.6-pinconnector(wiring
harnessforthemachine)
3.Starter-switchconnector
2.6-socketconnector(dash
harness)
4.6-socketconnector(wiring
harnessforthemachine)
5.Connectthe6-pinconnectorofthewiringharnessfor
themachineintothe6-socketconnectorofthedash
harness(Figure53).
6.Applyacoatofmedium-grade,thread-locking
compoundtothethreadsofthe4angebolts(8x30
mm)thatyouremovedinstep2ofRemovingtheDash
Panel(page14).
7.Aligntheholesinthedashpanelwithholesinthe
consoleframe(Figure54).
G030030
Figure54
8.Assemblethedashpaneltotheconsole(Figure55)
withthe4angebolts(8x30mm)and2ange
locknuts(8mm).
Figure55
1.Flangebolt(8x30mm)
3.Dashassembly
2.Flangelocknut(8mm)
9.Tightentheange-headboltsandlocknutstoanal
torqueof120to140N-cm(108to132in-lb).
20