Installation Instructions

ManualsBrandsToro ManualsAttachmentsPivoting Hose Reel Finishing Kit, 2014 and Before Multi-Pro 5800 Turf Sprayer

FormNo.3391-541RevA

PivotingHoseReelFinishingKit

2014andBeforeMulti-Pro5800TurfSprayer

ModelNo.131-3291

InstallationInstructions

ThePivotingHoseReelFinishingKitisadedicated

attachmentforaturfsprayapplicationvehicleandisintended

tobeusedbyprofessional,hiredoperatorsincommercial

applications.Itisprimarilydesignedforsprayingon

well-maintainedlawnsinparks,golfcourses,sportselds,

andoncommercialgrounds.

ThiskitisusedtoinstallthePivotingHoseReelKiton

machinemodels41593,41593N,and41594builtfrom2014

andbefore.

ThisproductcomplieswithallrelevantEuropeandirectives,

fordetailspleaseseetheseparateproductspecicDeclaration

ofConformity(DOC)sheet.

Readthismanualcarefullytolearnhowtooperateand

maintainyourproductproperly.Theinformationinthis

manualcanhelpyouandothersavoidinjuryandproduct

damage.AlthoughTorodesignsandproducessafeproducts,

youareresponsibleforoperatingtheproductproperlyand

safely.

YoumaycontactTorodirectlyatwww .Toro.comforproduct

andaccessoryinformation,helpndingadealer,ortoregister

yourproduct.

PreparingtheMachine

1.Ensurethatthemachineisemptyofalluids.

Note:Ifchemicalshavebeenusedinthemachine,

ushthesystemthoroughlywithcleanwater;referto

yourvehicleOperator'sManualforinstructions.

2.Parkthemachineonaatarea,settheparkingbrake,

stopthepump,stoptheengine,andremovethe

ignitionkey.

3.Disconnectthenegativebatteryterminalfromthe

battery.

InstallingtheValveAssembly

1.Disconnectthepressuretransducerwirefromthe

pressure-gaugeport.

2.Removethe4longboltssecuringthepressure-gauge

porttotheboomvalvesanddiscardthem(Figure1).

Retaintheatwashersandlocknuts.

Figure1

1.Stabilizingbracket

3.Longbolt

2.Pressure-gaugeport

3.Removeandretainthe2boltsandnutssecuringthe

stabilizingbrackettothevalveassembly(Figure1).

4.InstalltheO-ring,thenewcontrolvalve,andthe

previouslyremovedpressure-gaugeport,andstabilizing

bracketusingthe4longbolts;refertoFigure2.

Note:Theboltsshouldpassthroughthevalvebodies

andthroughthebracketontheopposingside.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3391-541*A

Summary of content (2 pages)

PAGE 1
Form No. 3391-541 Rev A Pivoting Hose Reel Finishing Kit 2014 and Before Multi-Pro 5800 Turf Sprayer Model No. 131-3291 Installation Instructions The Pivoting Hose Reel Finishing Kit is a dedicated attachment for a turf spray application vehicle and is intended to be used by professional, hired operators in commercial applications. It is primarily designed for spraying on well-maintained lawns in parks, golf courses, sports fields, and on commercial grounds. Preparing the Machine 1.
PAGE 2
1 2 3 4 5 6 7 8 g0282 52 Figure 2 1. Locknuts 4. Control valve 7. Pressure-gauge port 2. Washers 5. Adapter, existing 8. Stabilizing bracket 3. O-ring 6. O-ring, existing 9. Long bolts (M8) 5. Secure the bolts with the washers and locknuts removed previously. 6. Torque the long bolts to 272-373 N-cm (24-30 in-lb). 7. Secure the bolts of the mounting bracket to the mounting rail. 8. Route the wiring harness as shown in Figure 3. Figure 3 1. Battery terminals 2. Fuse connector 4.