Installation Instructions

4
AssemblingandMountingthe
HandheldRemote
Partsneededforthisprocedure:
1Handheldremote
4AAbatteries
1Magneticbracket
Procedure
1.Removetherubberbandssecuringtheremotehalves
together,andremovethebackcover.
2.Installthebatteriesintotheterminalcradleobserving
properpolarity.
Note:Ifyouinstallthebatteriesimproperly,theunit
isnotdamaged,butitfailstooperate.Thecradleis
embossedwithpolaritymarkingsforeachterminal
(Figure24).
g035520
Figure24
1.Rubberseal3.Handheldremote
2.Steelgasket4.AAbatteries(4)
3.Ensurethatthesteelgasketandrubbersealareseated
inthechannelintheremotebeforeyousettheback
coverinplace(Figure24).
4.Securethecoverwith6screws(Figure24)andtorque
themto1.5to1.7N∙m(13to15in-lb).
5.Installthehandheldremoteintothemagneticremote
bracket,slidethehalvestogethertosecuretheremote,
andtightentheboltinthemagnet(Figure25).
g028874
Figure25
1.Handheldremote3.Boltinthemagnet
2.Magneticremotebracket
6.Ifdesired,installthecontrollermountassemblyonthe
towvehicletostorethewirelessremote.Otherwise,
usethemagnetonthebackoftheremotetostickthe
remotetoanymetalcomponent.
g028873
Figure26
1.Handheldremote3.Mountingbolts
2.Controllermountassembly
11