Parts Catalogue

10
ROV-659
INSTALLING WINCH
1. Set the parking brake and remove the key from the ignition.
2. Remove both seats, center console, operator-side seat-base, and battery
cover; then disconnect the battery.
3. From the left-side of the vehicle, position the winch onto the bumper
plate with the cable positioned so it will spool from the bottom of the reel.
Loosely secure the winch (A) to the back side of the bumper plate with
the two M8 x 20 Cap Screws (C) and Lock Washers (D) into the two
upper bumper plate mounting holes. Do not tighten at this time.
! WARNING
Always disconnect the negative battery cable first.
CAUTION
Remove the bottom tie screw securing the winch together or
damage to the cable/rope may occur. This should be retained for
winch service.
3000 lb winch eng.fm Page 10 Wednesday, August 27, 2014 2:59 PM