Operator's Manual

22
12. Follow steps 4-5 of Wheel in this section; then
install the tracks and adjust track tension (see
Adjusting Components - Track Tension).
Preparation for Storage
1. Thoroughly clean off any dirt prior to storage.
2. Store on a level location to ensure its stability.
3. Do not put additional weight on the vehicle.
4. Store the vehicle in clean, dry place.
5. Do not store near heat source.
6. Consult maintenance schedule.
Preparation after
Storage
1. Verify tightening fasteners are secure.
2. Verify that main axles and wheels spin freely.
3. Verify that anti-rotational devices work properly
and are adjusted correctly.
4. Verify track tension.
5. Consult maintenance schedule.
EC DECLARATION OF CONFORMITY
We,
Soucy International Inc.
5450 ST-ROCK-S, CP400
Drummondville, QC, J2B6W3, Canada,
Declare That The Products: «TIGER TRAX 2» 2540189 AND 2540191, Fulfil All The Relevant Provisions Of
The Directive: 2006/42/EC in Drummondville On May 16, 2013
CAUTION
If stored for more than four consecutive weeks in a
wet place, verify bearings and seals are not dam-
aged.