Operator's Manual

6
Front Mounting Bracket Kit Assembly:
(p/n 1541-121 - Right) - (p/n 1541-120 - Left)
NOTE: The Qty column reflects the total number of components in both kits.
NOTE: A-M are part of the Front Prowler Anti-Rotation Arm Kit (p/n 1541-128).
TT-060
Ref. No. p/n Qty Description Ref. No. p/n Qty Description
1 2441-731 1 Right Side Lower Mounting Plate A 2441-640 2 Threaded Rod (M16-2 x 294 mm)
2441-730 1 Left Side Lower Mounting Plate B 2441-741 2 Rod End (M16 x 2)
2 2441-732 2 Spacer C 2441-641 2 Slider Sleeve
3 2441-734 1 Right Side Decal D 2441-743 2 Spring
2441-733 1 Left Side Decal E 2441-744 2 Spring Washer (Rubber Side)
4 2441-735 2 Hex Nylon Nut (M12-1.75) F 2441-745 2 Spring Washer (Nut Side)
5 2441-736 2 Flange Nylon Nut (M12-1.75) G 2441-746 2 Thick Washer
6 2441-737 2 Carriage Bolt (M12-1.75 x 65 mm) H 2441-642 4 Rubber Damper (25.4 mm)
7 2441-739 1 Right Side Upper Mounting Plate I 2441-772 2 Anti-Rotation Arm Bracket
2441-738 1 Left Side Upper Mounting Plate J 2441-749 2 Hex Nut (M16 -2)
K 2441-750 4 Hex Nut (M16-2 (Thin))
L 2441-751 2 Hex Nylon Nut (M16-2)
M 2441-652 4 Cap Screw (M10-1.5 x 25 mm)
Right-Side View