Parts Catalogue

8
Rear Mounting Bracket Kit Assembly - Prowler HDX and XTZ models:
(p/n 1541-123 - Right) - (p/n 1541-122 - Left)
NOTE: The Qty column reflects the total number of components in both kits.
NOTE: A-N are part of the Rear Prowler Anti-Rotation Arm Kit (p/n 1541-129).
TT-062
Ref. No. p/n Qty Description Ref. No. p/n Qty Description
1 2441-651 1 Right Side Mounting Plate A 2441-646 2 Threaded Rod (M16-2 x 375 mm)
2441-643 1 Left Side Mounting Plate B 2441-741 2 Rod End (M16 x 2)
2 2441-754 4 Spacer C 2441-647 2 Slider Sleeve
3 2441-756 1 Right Side Decal D 2441-743 2 Spring
2441-755 1 Left Side Decal E 2441-744 2 Spring Washer (Rubber Side)
4 2441-735 2 Hex Nylon Nut (M12-1.75) F 2441-745 2 Spring Washer (Nut Side)
5 2441-758 4 Hex Nylon Nut (M10-1.5) G 2441-746 2 Thick Washer
6 2441-660 2 Hex Bolt (M10-1.5 x 70 mm) H 2441-642 6 Rubber Damper (25.4 mm)
7 2441-760 2 Carriage Bolt (M12-1.75 x 75 mm) I 2441-772 2 Anti-Rotation Arm Bracket
8 2441-761 2 Hex Bolt (M10-1.5 x 110 mm) J 2441-749 2 Hex Nut (M16-2)
9 2441-659 4 Flat Washer (M8) K 2441-750 4 Hex Nut (M16-2 (Thin))
L 2441-751 2 Hex Nylon Nut (M16-2)
M 2441-652 4 Hex Bolt (M10-1.5 x 25 mm)
N 2441-649 2 Flat Washer (2 in.)
Right-Side View