Installation Instructions
Table Of Contents
FormNo.3403-342RevA
WheelToothKit
SGR-6andSGR-13StumpGrinder
ModelNo.132-4006
ModelNo.132-4007
ModelNo.132-4008
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
InstallingtheKit
Duetothehighamountofwearplacedontheteeth,rotate
andreplacethemperiodically.Beforeyourotateorreplace
them,inspecteachtoothholderonthewheel,includingthe
atlandsthatpreventtheteethfromrotating.Ifthetooth
holderisdamaged,replacethewheel.
Toinstallatooth,align1ofthe3atsideswiththeatside
onthecuttingwheel.Securethetoothwithawasherandnut
andtorquethenutto68N∙m(50ft-lb).
Eachtoothisindexedwith3positionssothatyoucanrotate
ittwice,exposinganewsharpedgebeforereplacingthe
tooth.Torotateatooth,loosenthenutsecuringthetooth
(Figure1).Pushthetoothforwardandrotateit1/3ofa
turn,bringinganunusededgetotheoutside.Torquethenut
securingthetoothto68N∙m(50ft-lb).
Figure1
1.Tooth4.Nut
2.Toothholder5.Flatland
3.Washer
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3403-342*A