Installation Instructions

FormNo.3396-346RevA

BasketSupportKit

Greensmaster

3300/3320/3400/3420TriFlex

TractionUnit

ModelNo.132-6961

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Removetheoldpoprivetsandbasketsupport.

Basketsupport1

Poprivet18

Installthebasketsupportkit.

RemovingtheOldPopRivets

andBasketSupport

Beforeinstallingthenewbasketsupportkit,cutouttheold

poprivetsandremovetheoldbasketsupport.

InstallingtheBasketSupport

Kit

1.Alignthebasketsupportwiththeexistingholesinthe

basket(Figure1).

Figure1

1.Basket2.Basketsupport

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3396-346*A

PAGE 1
Form No. 3396-346 Rev A Basket Support Kit Greensmaster® 3300/3320/3400/3420 TriFlex® Traction Unit Model No. 132-6961 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Remove the old pop rivets and basket support.
PAGE 2
. Using the basket support as a template, mark 3 holes on each side of the basket (Figure 1). 3. Using a 5/32” drill bit, drill out the 3 marked holes on each side of the basket (Figure 2). Figure 4 1. Basket 2. Pop rivet Figure 2 Left side holes shown 4. Align the basket support with the holes in the basket. 5. Install the pop rivets into the basket support (Figure 3 and Figure 4).