Installation Instructions

FormNo.3405-191RevA

PowerConverterKit

Workman

GTXElectricUtilityVehicle

ModelNo.133-0959

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

PreparingtheMachineandDisconnectingtheNegativeCable

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3405-191*A

PAGE 1
Form No. 3405-191 Rev A Power Converter Kit Workman® GTX Electric Utility Vehicle Model No. 133-0959 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Preparing the Machine and Disconnecting the Negative Cable © 2016—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com.
PAGE 2
Assembling the Converter Plate 1x 1x 4x 2 4x
PAGE 3
Routing the Wire Harness 1x 3
PAGE 4
Connecting the Wire Harness to the Machine Connector Description Label J01 Insulated Spade 6.3 mm (1/4 inch) To Cab +12V Power J02 Insulated Receptacle 6.3 mm (1/4 inch) To Cab 12V Ground J03 Non-Insulated Receptacle 6.3 mm (1/4 inch) To 48V Fuse Block J04 Insulated Terminal Ring (#8) To 48V Ground Block P01 4 Socket To Cab Converter J38 Insulated Spade 6.3 mm (1/4 inch) Cab Power Graphic Reference Note: Use cable ties to secure the wire harness away from sharp or moving parts.
PAGE 5
Connecting the Wire Harness to the Front Converter Connector Description Label P36 4 Socket No label is attached. P02 4 Pin To Machine Converter Connector P03 4 Socket To Machine Converter Graphic Reference Note: Use cable ties to secure the wire harness away from sharp or moving parts.
PAGE 6
Mounting the Relay to the Converter Assembly Note: Use cable ties to secure the wire harness away from sharp or moving parts.
PAGE 7
Notes: 7
PAGE 8