Installation Instructions

ManualsBrandsToro ManualsVehiclesWide Angle Mirror Kit, Workman GTX Utility Vehicle

FormNo.3424-502RevA

WideAngleMirrorKit

Workman

GTXUtilityVehiclewithCanopy

ModelNo.133-1009

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Nopartsrequired

–

Removethecanopysupportbracket(forGTXmodelswith

acanopy—Model07921or07922).

Mirrorbracket2

Carriagebolt(1/4x3/4inch)

Locknut(1/4inch)

Installthebrackets(forGTXmodelswithacanopy—Model

07921or07922).

Mirrorbracket2

Carriagebolt(1/4x3/4inch)

Locknut(1/4inch)

Carriagebolt(1/4x1-1/2inches)

Installthebrackets(forGTXmodelswitha2-person

canopy—Model07140or4-personcanopy—Model

07141).

Wideanglemirror1

Handleknob2

Carriagebolt(1/4x3/4inch)

Installthemirror(forGTXmodelswithacanopy—Model

07921or07922).

Wideanglemirror1

Handleknob2

Carriagebolt(1/4x3/4inch)

Installthemirror(forGTXmodelswitha2-person

canopy—Model07140or4-personcanopy—Model

07141).

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutofftheengineandremovethekey.

g038447

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3424-502*A

Summary of content (8 pages)

PAGE 1
Form No. 3424-502 Rev A Wide Angle Mirror Kit Workman® GTX Utility Vehicle with Canopy Model No. 133-1009 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Prepare the machine. No parts required – Remove the canopy support bracket (for GTX models with a canopy—Model 07921 or 07922).
PAGE 2
Removing the Canopy Support Bracket For GTX Models with Canopy Model 07921 or 07922 Remove the canopy support bracket as shown in Figure 2. Note: Retain the support bracket and hardware for later installation.
PAGE 3
Installing the Brackets For GTX Models with Canopy Model 07921 or 07922 Install the 2 mirror brackets to the canopy support bracket using the 2 carriage bolts (1/4 x 3/4 inch) and 2 locknuts (1/4 inch) as shown in Figure 3.
PAGE 4
Installing the Brackets For GTX Models with 2-Person Canopy (Model 07140) or 4-Person Canopy (Model 07141) Install the 2 mirror brackets using the 2 carriage bolts (1/4 x 3/4 inch), carriage bolts (1/4 x 1-1/2 inches), and 2 locknuts (1/4 inch) as shown in Figure 4.
PAGE 5
Installing the Mirror For GTX Models with Canopy Model 07921 or 07922 1. Slide the mirror bracket onto wide angle mirror (A of Figure 5). 2. Secure the right side of wide angle mirror to the mirror bracket using a carriage bolt (1/4 x 3/4 inch) and handle knob (B of Figure 5). 3. Secure the left side of the wide angle mirror using a handle knob (C of Figure 5). g258956 Figure 5 4. Adjust the height and angle of the mirror; refer to Adjusting the Height and Angle of the Mirror (page 7). 5.
PAGE 6
Installing the Mirror For GTX Models with 2-Person Canopy (Model 07140) or 4-Person Canopy (Model 07141) 1. Slide the mirror bracket onto wide angle mirror (A of Figure 6). 2. Secure the right side of wide angle mirror to the mirror bracket using a carriage bolt (1/4 x 3/4 inch) and handle knob (B of Figure 6). 3. Secure the left side of the wide angle mirror using a handle knob (C of Figure 6).
PAGE 7
Operation Adjusting the Height and Angle of the Mirror Adjust the height and angle of the mirror as shown in Figure 7.
PAGE 8