Installation Instructions

ManualsBrandsToro ManualsRiding EquipmentToro 133-1438

FormNo.3403-321RevA

ElectricalAccessoryPort

GrandStand

Mower

ModelNo.133-1438

InstallationInstructions

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Note:Ifyourmachinehasalightkitandanotherelectricalaccessoryinstalled,youneedaYharness(ToroPartNo.121-5988,

soldseparately)toinstallthiskit.

Installation

InstallingtheElectrical

AccessoryPort

1.Shutofftheengine,waitforallmovingpartstostop,

engagetheparkingbrake,andremovethekey.

2.Removethenegative(-)batterycablefromthebattery.

3.Releasethecushion.

4.Removetheknockoutontherightsideofthemachine

(Figure1).

Figure1

1.Knockoutlocation2.12Vreceptacle

5.Removethelockingringfromthe12Vreceptacle.

6.Installthe12Vreceptacleandsecureitwiththelocking

ring(Figure1).

ConnectingtheWireHarness

1.Installthepostconnectorsfromthewireharnessto

thepostsonthe12Vreceptacle.

2.Connectthewireharnessasfollows.

•Machineswithoutanyelectric

accessories—connectthewireharnessto

themachinemainharness(Figure2).

Figure2

1.Machinemainharness2.Wireharness

•Machineswitheitheralightkitorother

electricaccessory—connectthewireharnessto

theaccessoryconnectoronthelightkitorother

accessoryharness.

•Machineswithbothalightkitandother

electricaccessory—completeasfollows:

Note:YouneedaYadapter(ToroPartNo.

121-5988,soldseparately)toconnectthewire

harnesswithbothaccessoriesinstalledonthe

machine.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3403-321*A

Summary of content (2 pages)

PAGE 1
Form No. 3403-321 Rev A Electrical Accessory Port GrandStand® Mower Model No. 133-1438 Installation Instructions Note: Determine the left and right sides of the machine from the normal operating position. WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Note: If your machine has a light kit and another electrical accessory installed, you need a Y harness (Toro Part No.
PAGE 2
A. Disconnect the other accessory from the accessory connector of light kit harness. B. Connect the 1-connection end of the Y adapter to the accessory connector of the light kit harness (Figure 3). Important: Do not connect the 2-connection end of the Y adapter to the light kit. C. Connect the wire harness and the other accessory harness to the 2-connector end of the Y adapter (Figure 3). Figure 3 1. Wire harness and other accessory harness 3. Light kit harness 2.