Installation Instructions

FormNo.3438-786RevA

ShredderBarKit

ModelNo.134-4194—SerialNo.400000000andUp

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Nopartsrequired

–

Preparethedeck.

Shredderbar

Carriagebolt(10X25mm)

Flangelocknut(10mm)

Installthekit.

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Raisethecuttingunit.

4.Shutoffthemachineandremovethekey.

5.Supportthecuttingunitwithjackstands.

PreparingtheDeck

NoPartsRequired

Procedure

1.CleanthetopofthedeckasshowninFigure1.

g317984

Figure1

2.Cleanthebottomofthedeckasshownin

Figure2.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3438-786*A

PAGE 1
Form No. 3438-786 Rev A Shredder Bar Kit Model No. 134-4194—Serial No. 400000000 and Up Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 Description Use Qty. No parts required – Prepare the machine. No parts required – Prepare the deck. Shredder bar Carriage bolt (10 X 25 mm) Flange locknut (10 mm) 1 8 8 Install the kit.
PAGE 2
3 Installing the Kit Parts needed for this procedure: g317987 1 Shredder bar 8 Carriage bolt (10 X 25 mm) 8 Flange locknut (10 mm) Procedure 1. At the bottom of the deck, align the holes in the shredder bar to the holes in the deck (Figure 4). g317982 Figure 2 3. Identify the 8 knock-out plugs at the top of the deck (Figure 3). g318182 Figure 4 1. Carriage bolt 3. Hole (bottom of the deck) 2. Fin (shredder bar) 2. g318546 Figure 3 1. Knock-out holes 4.
PAGE 3
g318183 Figure 5 1. Carriage bolts and flange locknuts 2. Flange locknut 3. Carriage bolt 3. Assemble the other carriage bolts (10 X 25 mm) and flange locknuts (10 mm) to the holes in the fine cut baffle and deck. 4. Torque the flange locknuts to 47 to 57 N∙m (34 to 42 ft-lb).
PAGE 4