Installation Instructions

FormNo.3439-284RevA

DebrisSuppressionKit

ProLineH800RotaryMower

ModelNo.134-4690

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Hopperscreenassembly1

Doorscreen1

Bolt4

Washer8

Nut4

Installthekit.

PreparingtheMachine

1.Dumpanygrassfromthegrasshopper.

2.Lowerthegrasshopper.

3.Parkthemachineonalevelsurface.

4.Engagetheparkingbrake.

5.Shutoffthemachineandremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3439-284*A

PAGE 1
Form No. 3439-284 Rev A Debris Suppression Kit ProLine H800 Rotary Mower Model No. 134-4690 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Prepare the machine. Hopper screen assembly Door screen Bolt Washer Nut 1 1 4 8 4 Install the kit. Preparing the Machine 1. Dump any grass from the grass hopper. 2. Lower the grass hopper. 3. Park the machine on a level surface. 4.
PAGE 2
Installing the Kit Installing the Kit 1. Open the hopper door. 2. Line up the door screen with the existing door mesh. 3. Use the 4 holes on the door screen to mark the 4 drill locations on the door mesh. 4. Drill 7.0mm holes in the door mesh at the marked locations. 5. Install the door screen onto the door mesh with 4 bolts, 8 washers, and 4 nuts (Figure 1). g320409 Figure 1 1. Door screen 2. Washer 4. Bolt 5. Existing door mesh 3. Nut 6.
PAGE 3
g217355 Figure 2 1. Release lever 7. 2. Hopper screen Remove the existing hopper screen (Figure 3). g215931 Figure 3 8. Install the new hopper screen and lock it in place. Maintenance Cleaning the Hopper Screen Service Interval: Before each use or daily 1. Open the hopper door. 2. Pull the release lever on the bottom of the hopper screen downward (Figure 2). 3. Remove the hopper screen and clean it (Figure 3). 4. Install the hopper screen.
PAGE 4