Installation Instructions

FormNo.3446-141RevA

DebrisDeectorKit

ProLineH800RotaryMower

ModelNo.134-5691

InstallationInstructions

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

Installation

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Disengagethepowertakeoffandlowerthe

attachments.

3.Engagetheparkingbrake.

4.Shutofftheengineandremovethekey.

5.Waitforallmovementtostop.

InstallingtheDeector

Partsneededforthisprocedure:

Deector

Bolt(M8x25mm)

Flangenut(M8)

Procedure

1.Positionthedeectoragainstthereardooras

showninFigure1.

g364543

Figure1

1.Deector

2.Reardoor

2.Usingthedeectorasatemplate,markthe

holesonthereardoor.

3.Drill10mm(13/32inch)holesforthebolts

(Figure2).

g364541

Figure2

1.Drill10mm(13/32inch)holes

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3446-141*

PAGE 1
Form No. 3446-141 Rev A Debris Deflector Kit ProLine H800 Rotary Mower Model No. 134-5691 Installation Instructions Note: Determine the left and right sides of the machine from the normal operating position. Installation 1 Preparing the Machine No Parts Required Procedure g364543 Figure 1 1. Park the machine on a level surface. 2. Disengage the power takeoff and lower the attachments. 1. Deflector 3. Engage the parking brake. 2. 4. Shut off the engine and remove the key.
PAGE 2
4. Install the deflector to the rear door with 4 bolts (M8 x 25 mm) and 4 nuts (M8); refer to Figure 3. g364542 Figure 3 1. Flange nut (M8) 3. Bolt (M8 x 25 mm) 2. Washer 4.