Installation Instructions

FormNo.3415-648RevA

UniversalSunshadeMountKit

SerialNumber400000000andAfterGroundsmaster

4500or4700

SeriesTractionUnit

ModelNo.136-1830

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

LeftROPS-mountingbracket

RightROPS-mountingbracket

U-bolt(3-1/2x5inches)

U-bolt(4-1/2x3inches)

Bolt(3/4x4inches)

Locknut(3/4inch)

Washer4

Installthemountingbracket.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3415-648*A

PAGE 1
Form No. 3415-648 Rev A Universal Sunshade Mount Kit Serial Number 400000000 and After Groundsmaster® 4500 or 4700 Series Traction Unit Model No. 136-1830 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Loose Parts Use the chart below to verify that all parts have been shipped.
PAGE 2
Installing the Mounting Bracket 1. Park the machine on a level surface, engage the parking brake, shut off the engine, and remove the key. 2. Use the 8 flange nuts (3/8 inch) from the sunshade kit and the 4 U-bolts (3-1/2 x 5 inches) to loosely install the brace brackets to the roll bar (Figure 1). g213729 Figure 1 1. Left ROPS-mounting bracket 6. Brace bracket—from the sunshade kit 2. Flange nut (3/8 inch)—from the sunshade kit 7. Locknut (3/4 inch) 3. U-bolt (3-1/2 x 5 inches) 8. Washers 4.